Recent content by kylant

i have the falkens. they ride great. minimal weight to balance. i have learned they kind of suck in the snow though. i got stuck on flat ground, compacted snow with them. i was not high centered. luckily we have had a low snow year. i am looking for another/better snow tire. i have read the BFG...

that's bullshit. they can 100% absolutely sell it and give you a "due bill" with the black emblems listed. when they come in, you go back and have them installed. or better yet, do it yourself. that way you do it right and hopefully don't dimple your sheet metal when taking the originals off...

nice 👍 please share more about the dirt kings. i have been looking at them. the rears seem a touch longer than stock, so they should work well can you adjust them softer than the dssv? how about freeway expansion joints? thanks for any info you can share

the dssv shocks are the limiters for the front suspension travel. at full extension the UCA is not anywhere close to touching the service perch. with the cognito shock spacers in, the UCA still does not touch the perch, but it is very close. IMO, you do not want the shocks being the limiters. i...

what are the thoughts on something like this? https://www.crutchfield.com/p_20651HS10/Kicker-51HS10.html

exactly. the dssv shocks are the droop stop on the zr2. mine were the same way. the uca was 3/4-1" off the service perch at full droop. with the spacer, they are still not touching, but very close now

it does seem like this behavior is actually a software issue. there is a bulletin out to address it. over on FB there is a thread for this. here is the bulletin number. I will have mine updated at some point.

it seems like i couldn't adjust it. i will try again

i installed the app. did the hearing test thing. it really didn't seem to be of much benefit for me, so i deleted it

that's how they are. mine are the same way. my 2025 at4 and 2022 high country did the same. there are other guys reporting the same.

so is this available through the apple app store?

the regular hd trucks do not have a block in the rear

bro, not really common sense. most stock ZR2 HD trucks are at 42.5" front. mine included. that's not even your truck. kick rocks

is the second measurement the rear?

1 turn of the torsion bar bolt = 1/4" lift height. the rear bump stop is in the the same place as a regular HD truck, they did not lower it. they did add the plastic piece over the axle pad. easily removable. pretty easy to swap a 1" block. the u-bolts should work just fine. if you got rid of...