Rear Window patch sticker for ZR2

[Mixander Xi]

Based on friends' suggestions, I developed rear window patches for the ZR2, and the results were great! Later, I discovered they also fit 2019-2025 Silverado/Sierra models.
Our product material is PC (polycarbonate), not Vinyl. PC offers higher light transmittance and greater thickness, allowing it to achieve a mirror-like effect.
Now, I'm working on versions for 2014-2019 Silverado/Sierra.
If you're interested, feel free to check them out!

Rear Back Window black and shiny Sticker Patch for Chevrolet Silverado/GMC Sierra 2019-2025 – RTG-OFFROAD

www.rtgoffroad.com

 

[laibal]

I ordered one, Patiently waiting for it to arrive. My high country has the shiny pillars from factory and I think this will match nicely to the back window!

 

[Mixander Xi]

I ordered one, Patiently waiting for it to arrive. My high country has the shiny pillars from factory and I think this will match nicely to the back window!

It will be shipped tomorrow and you should receive the tracking number on Sunday afternoon.

 

[Byrds8]

Mine are already on the way

 

[Waterdog]

I added this to my HC. Looks great!

 

[HighTechPauper]

Mixander also has pieces for the sides and the triangle piece next to the side view mirror if anyone is interested in the whole set.

 

[AXE]

What do they attach with? It's 115F+ around these parts. Tape doesn't usually work for long.

 

[RCF71]

They just peel and stick onto the existing plastic pieces? And look that smooth? The matte stuff on my truck looks like there is some texture to it is why I ask.

 

[HighTechPauper]

What do they attach with? It's 115F+ around these parts. Tape doesn't usually work for long.

I am told the adhesive is an upgraded colloidal gel based on 3M's formula, he says it holds very well and gets harder over time and heat. He has a little video showing removing them after they had been on in the 100F summer there in China this year and the residue left was minimal, I am not sure yet what he used to clean that residue off, maybe he used his fingers/hands to rub it off or used some cleaner, I will ask him later when he wakes up.

The pieces themselves are a polycarbonate material, and while scratch resistant they can be scratched easily if an abrasive is used on it, I imagine it is like all the other piano black gloss where fine swirls would show up over time and any deep scratch is going to stand out.

If you DM Mixander AXE he will send you some to test out in the heat for him.

I think at $57.39 for both side and back pieces it is a reasonable price that might allow for inexpensive replacement if scratched or damaged.

 

[HighTechPauper]

They just peel and stick onto the existing plastic pieces? And look that smooth? The matte stuff on my truck looks like there is some texture to it is why I ask.

Yes, they look just like that, while they are a thin polycarbonate they are thick enough to not show any of the texture beneath it. I like the look of them, but I don't know how they would hold up over time, if you liked them you might need to replace them occasionally, just guessing here.

I think most of us are more into permanent OEM looking solutions, but at about $58 a set for sides and backs, some may want to play around with them to see how they work out.

 

[HighTechPauper]

The reason I posted on this stuff is that since Mix had posted about the back pieces I asked why he didn't include the side pieces, I mean anyone interested would probably want to try them too, he said that since he lost his ISP/VPN provider (went out of business) that he is having a lot of issues with the normal ISP connection available to the public in China and that posting anything is a real chore because it won't go through and keeps failing to post pictures or even the whole post sometimes, so he kind of forgot after having some small success getting the back pieces posted. He is working on finding a new cost effective ISP/VPN that will give them better connectivity to the world outside of China. Just an FYI.