What have you done to your Silverado ZR2 this week? 🛠️

[securityguy]

Today I installed the Kicker sub. It sounds a whole lot better now. I flipped up all the dip switches. The control knob wont be here til possibly tomorrow. I am not sure Ill even need the knob though as it sounds pretty damn good without it.

Tomorrow....all around tint

I did Xpel ceramic on mine

 

[Byrds8]

I did Xpel ceramic on mine

That is what will be in mine. $725 for the entire truck including windshield and a visor on top of that.

 

[Byrds8]

Annnd tint is done. 70% on the front with a 5% visor, 30% on the front doors, 20% on the rear doors and 5% on the rear. I think I may eventually put a clear on the sunroof just to block some of the heat from it.

The bass knob for the Kicker sub came in today also. I do however think I will send it back. I dont think I need it. I turned down the overall bass a bit and think it sounds great where it is.

 

[ZR2DARKASH]

ADDED Range DFM Auto Start stop disable.

 

[securityguy]

Bought a bed mat off Amazon and extremely pleased with it. High quality and the fit is excellent. Once we get some heat, versus a TON of rain, the mat will settle down a bit and hug the bed.

Amazon.com

 

[RadioWavz]

Today I installed the Kicker sub. It sounds a whole lot better now. I flipped up all the dip switches. The control knob wont be here til possibly tomorrow. I am not sure Ill even need the knob though as it sounds pretty damn good without it.

Tomorrow....all around tint

I’ve got to do some stereo work on mine soon. The Bose system is so uninspiring. The only thing I find disappointing with the truck for the most part.

 

[Byrds8]

I’ve got to do some stereo work on mine soon. The Bose system is so uninspiring. The only thing I find disappointing with the truck for the most part.

Event though the Bose isn’t great, it’s not as bad as the kicker in the wrangler. The bass in the wrangler is better but that is it. Now the is there it’s not so bad.

 

[Byrds8]

Bought a bed mat off Amazon and extremely pleased with it. High quality and the fit is excellent. Once we get some heat, versus a TON of rain, the mat will settle down a bit and hug the bed.

Amazon.com

View attachment 16178

View attachment 16179

Just out of curiosity, if there is a bed liner, what extra purpose would this serve?

 

[AXE]

Just out of curiosity, if there is a bed liner, what extra purpose would this serve?

Cushioning for heavy loads, keep stuff from sliding around, sound deading, and protection for the liner.

Also to collect dirt and debris underneath it so the liner is discolored and too make it harder to clean the bed.

 

[Byrds8]

Cushioning for heavy loads, keep stuff from sliding around, sound deading, and protection for the liner.

Also to collect dirt and debris underneath it so the liner is discolored and too make it harder to clean the bed.

Thanks.

 

[securityguy]

Cushioning for heavy loads, keep stuff from sliding around, sound deading, and protection for the liner.

Also to collect dirt and debris underneath it so the liner is discolored and too make it harder to clean the bed.

Keeps stuff from sliding around. Very easy to pull out, clean the bed, if necessary (for what I don't know), and put it back. Will take like 5 minutes. If you would be concerned about the factory liner, it will protect that too. I put boxes in the back and this stops them from sliding all over the place which was my motivation.

 

[The_Q]

Traded my 2022 in on a 2024 with the baby max. The 22 ate another Fuel Pump Control Module while we were again 280 miles from home. At least this time I wasn’t in traffic. I used that as an excuse to get the baby max. Kind of nice to finally have all the ZR2 graphics on the DIC and Infotainment screens. This truck was also equipped with the Chevy bead lock wheels. Once things dry up, I’ll wash it and post some pictures.

 

[ZR2xBIZON]

Traded my 2022 in on a 2024 with the baby max. The 22 ate another Fuel Pump Control Module while we were again 280 miles from home. At least this time I wasn’t in traffic. I used that as an excuse to get the baby max. Kind of nice to finally have all the ZR2 graphics on the DIC and Infotainment screens. This truck was also equipped with the Chevy bead lock wheels. Once things dry up, I’ll wash it and post some pictures.

I'm only letting you slide on this DownGrade because you are a fellow Beagle Lover

 

[Almurr]

done this about 3 weeks ago.

Method beadgrips with BFgoodrich 35s no lift, and yes i had to trim my inner fender and a little off the front bumper on the inside of the wheel well.

 

[ZR2EDDYB]

Cab Mount Chop.

I have over 2” of front lift and was rubbing the fender liner, front bumper and rear cab mount. In my case, there was no way to have a fully functional truck without chopping the cab mount with 35” tires.

 

[Leonidas]

done this about 3 weeks ago.

Method beadgrips with BFgoodrich 35s no lift, and yes i had to trim my inner fender and a little off the front bumper on the inside of the wheel well.

Offset?

 

[AXE]

Traded my 2022 in on a 2024 with the baby max. The 22 ate another Fuel Pump Control Module while we were again 280 miles from home. At least this time I wasn’t in traffic. I used that as an excuse to get the baby max. Kind of nice to finally have all the ZR2 graphics on the DIC and Infotainment screens. This truck was also equipped with the Chevy bead lock wheels. Once things dry up, I’ll wash it and post some pictures.

Congratulations!

Damn, after all that nice work you did to the front end, I thought you'd at least hit a deer or something before you got rid of it........LOL

I still have my trusty spare FPCM under my rear seat. It's like carrying an extra magazine, you never know when you might need it. I'm ready when it goes.........LOL.

 

[ZR2xBIZON]

Cab Mount Chop.

I have over 2” of front lift and was rubbing the fender liner, front bumper and rear cab mount. In my case, there was no way to have a fully functional truck without chopping the cab mount with 35” tires.

Badass. I'm right behind ya on this mod

 

[LSnTX]

Traded my 2022 in on a 2024 with the baby max. The 22 ate another Fuel Pump Control Module while we were again 280 miles from home. At least this time I wasn’t in traffic. I used that as an excuse to get the baby max. Kind of nice to finally have all the ZR2 graphics on the DIC and Infotainment screens. This truck was also equipped with the Chevy bead lock wheels. Once things dry up, I’ll wash it and post some pictures.

Good motor upgrade
Congrats

 

[the0ilman]

Just enjoyed it.