OEM Wheels + 1.5" Wheel Spacer Pic Request

[KodiakEd]

Here was my experience:

https://www.chevyzr2.com/threads/wheel-spacers.1554/page-2#post-37723

Love the looks, but not the results.

 

[Jace]

Here is the 1.5" spacers on stock wheels with 295/70 Recon Grapplers.

You're Truck looks awesome. Do you have any rubbing with that set-up ?

 

[Big_White]

You're Truck looks awesome. Do you have any rubbing with that set-up ?

Very little in reverse at full lock mostly, but I still did some trimming. Would be fine for a mall crawler but i use my truck quite a bit off-road so i gave it clearance. I followed the suggestions on this thread trimming except i didnt cut a step into the lower bumper section, i made a smooth transition from top to bottom. I didnt like the idea of cutting up a new truck but the parts he cut are easily replaced for about $50 if i ever need to revert back to stock.

 

[Jace]

Very little in reverse at full lock mostly, but I still did some trimming. Would be fine for a mall crawler but i use my truck quite a bit off-road so i gave it clearance. I followed the suggestions on this thread trimming except i didnt cut a step into the lower bumper section, i made a smooth transition from top to bottom. I didnt like the idea of cutting up a new truck but the parts he cut are easily replaced for about $50 if i ever need to revert back to stock.

Thanks

 

[slicer]

Luckily the truck came with a few "perks":

• Bedrug (who DF puts carpet in a bed -- especially $500 carpet)

@USMCsilver I do!

I am in the IT industry, so I oftentimes pick up IT equipment. The bedrug is awesome for that kind of thing.

I'm also rough on my bedrug. My previous truck had a 12-year old bedrug and it looks like new since day one that has seen lots of blood, lots of oil, lots of stones, lots of wood and it pressure washes off easily. I use a floor vacuum to vac the dirt out.

 

[stevev331]

One spoiled-ass kid who turned 16 this week. It's even worse that he's good at baseball and plays on a national travel team. I swear I'm gonna go broke...

My wife wanted to get him a "nice" deer rifle for his 16th. I caved.

Nice... which can is that?

 

[USMCsilver]

Nice... which can is that?

Thanks. That's a SilencerCo Omega 300 with anchor brake and ASR mount.

@USMCsilver I do!

I am in the IT industry, so I oftentimes pick up IT equipment. The bedrug is awesome for that kind of thing.

I'm also rough on my bedrug. My previous truck had a 12-year old bedrug and it looks like new since day one that has seen lots of blood, lots of oil, lots of stones, lots of wood and it pressure washes off easily. I use a floor vacuum to vac the dirt out.

View attachment 18948

Well, that's very promising news.

Mine is a little different, as it even covers the sides of the bed.

 

[Chevyman2022]

Here is the 1.5" spacers on stock wheels with 295/70 Recon Grapplers.

Is there any rubbing with those larger tires? That’s the setup I want to go with.

 

[Chevyman2022]

1.5 bora spacers stock wheels stock tire size 275/70r18

 

[USMCsilver]

Thanks for the help, y'all.

I got them installed last week; I just didn't wanna mess with it. I also had some debadging done and had 'em throw the Range module on while they were there.

 

[JAYDEENEW]

I installed 1.5" spacers at 500 miles or so. No need to cut the studs using the stock wheels. The spacers made a huge difference in stance but the stock tires are still way too small.

What brand of wheel Spacer did you use?

 

[JAYDEENEW]

Just for giggles, here is a pic of my truck. I'm running 1 1/4"s on the front and 1 1/2"s on the rear. The front track is slightly wider than the rear from the factory so that's why I set mine up this way. I'm in architectural / engineering design and extremely OCD when it comes to dimensional discrepancies that no one else on the face of the planet would ever noticeView attachment 18651View attachment 18652

what brand did you install for the wheel spacers?

 

[The_Q]

what brand did you install for the wheel spacers?

I put Bora 1.25” spacers on my truck. Bora are made in the USA and a good, quality spacer.

I’ve decided to go a different route, so I now have them posted for sale here in the forum.

 

[Chevyman2022]

I put Bora 1.25” spacers on my truck. Bora are made in the USA and a good, quality spacer.

I’ve decided to go a different route, so I now have them posted for sale here in the forum.
View attachment 23582View attachment 23583

What route did you go instead?

 

[JAYDEENEW]

I put Bora 1.25” spacers on my truck. Bora are made in the USA and a good, quality spacer.

I’ve decided to go a different route, so I now have them posted for sale here in the forum.
View attachment 23582View attachment 23583

How do I access the for sale forum trying to find it

 

[The_Q]

How do I access the for sale forum trying to find it

Here is the link to the thread https://www.chevyzr2.com/threads/bora-1-25-spacers-for-sale.3534/
If you're interested, you can also send me a direct message through the forum.