Thoughts on new wheels and tires or go back to stock

[gfernet]

I’ll have to cut some plastic to keep them on that’s why I’m asking
295-50-22
Nitto says 33.6 diameter I thought would clear but it doesn’t

 

[ZR2EDDYB]

Personally, I like the stock wheels more.

How’s the ride with the upsized wheels?

 

[gfernet]

Personally, I like the stock wheels more.

How’s the ride with the upsized wheels?

i was almost thinking the same thing after i put the new ones on, ride is pretty similar tho just feel like it looks weird with less tire on a truck

 

[anuswax]

Stock wheels - looks more gooder / meaty

 

[ZR2EDDYB]

i was almost thinking the same thing after i put the new ones on, ride is pretty similar tho just feel like it looks weird with less tire on a truck

I am biased as I’m eyeing 17’s for my truck.

 

[AXE]

Trim like I did and run what you want. Life is too short for short trucks.

 

[ZR2Reaper]

I’ll have to cut some plastic to keep them on that’s why I’m asking
295-50-22
Nitto says 33.6 diameter I thought would clear but it doesn’t

what is your setup with the stock wheels? What size tires & do you have spacers? That is the look I am trying to go with my white ZR2

 

[slicer]

I’ll have to cut some plastic to keep them on that’s why I’m asking
295-50-22
Nitto says 33.6 diameter I thought would clear but it doesn’t

It didn't clear because of the offset. They stick out.

If you had wheels that had factory offset or very close to it, it'd clear no problem.

 

[KLA]

It didn't clear because of the offset. They stick out.

If you had wheels that had factory offset or very close to it, it'd clear no problem.

^^^^ I agree ^^^^. I have 2 inch spacers on my stock wheels with 33x12.50r18 tires and they rub slightly at full lock only in reverse. Going forward they are fine, with no rubbing at all. If it wasn't for the spacers, creating an offset, they would not rub at all, forward or in reverse.