What have you done to your Silverado ZR2 this week? 🛠️

[Roach769]

So much … full tint, paint protection film on the full front, smoked tail lights and full JL Audio system with all new JL Audio speakers plus a couple extra in the dash with 2 12” subs and the amps in a stealth box under the back seat because as the saying goes .. “No highs, no lows, must be Bose!”. Got this thing sounding now.

Next I’m looking to take care of the bed with a power retractable cover like a powertraxpro xr that I can mount some cross bars over for snowboard season stuff and figure out some additional mounting/tie down points. Need to get a new B&W tow hitch for it too. Also some black/black & red badges to replace the chrome. Then maybe I’ll be done for a minute. Yea, that’ll happen.

Damn you wasted no time. what sections did you PPF on the front? The whole front end/hood to doors?

 

[renGA]

Got the flowtie back from the paint shop and installed. Did the first oil change and gave it a bath.

Gonna try vinyl wrapping the chrome part on mine this week. Keeping the red also.

 

[B Hertz]

Damn you wasted no time. what sections did you PPF on the front? The whole front end/hood to doors?

That’s right.

 

[ZR2sky]

Let's see what you have done with your Silverado ZR2!

Flaps, G4

 

[B Hertz]

The B&W MultiFlex Tow and Stow receiver hitch was delivered today so I got that mounted with the Bolt hitch receiver lock that uses the truck key to unlock. I love this setup.

I believe next up is which tonneau cover to get.

 

[DNZR2]

Great choice.

 

[renGA]

Got my Peak Level Kit installed. 2.25" Front 1" Rear. Dirt King UCAs. Feels good so far after almost a week. UCAs look super close to the tire. Thinking of spacers, any one did a level and spacers? I also want the Factory Black 18s if anyone has a set for sale.

 

[Gandalfthegrey]

Ordered 6" Amber lights and going to Fab out a one off bumper with my neighbor.

 

[dedtoof]

Mickey Thompson Baja Boss 295/70 R18s. Black lugs and center caps. Rides nice with no rubbing but I’ll be doing minor trimming this spring because it will probably rub when flexed hard.

 

[The_Q]

Got my Peak Level Kit installed. 2.25" Front 1" Rear. Dirt King UCAs. Feels good so far after almost a week. UCAs look super close to the tire. Thinking of spacers, any one did a level and spacers? I also want the Factory Black 18s if anyone has a set for sale.

View attachment 20083 View attachment 20082 View attachment 20081

I have the same suspension setup. I’m using a 3/8” (10mm) spacer with stock wheels and tires to put some space between the tire and UCA. Still using the OEM lug nuts too.

 

[renGA]

I have the same suspension setup. I’m using a 3/8” (10mm) spacer with stock wheels and tires to put some space between the tire and UCA. Still using the OEM lug nuts too.

That was my plan, thanks for the info!

 

[The_Q]

I had been looking for a set of floor mats that offered removable carpet sections. I priced the genuine GM mats, but shipping was horrendous. Plus finding them in stock somewhere was next to impossible. The last couple of days my FaceBook feed kept popping up with these mats from 3wliners. They had 25% off and free shipping. So I took the bait For $127.00 I think they’re a pretty decent mat.

 

[Fluxcapacitor11]

I had been looking for a set of floor mats that offered removable carpet sections. I priced the genuine GM mats, but shipping was horrendous. Plus finding them in stock somewhere was next to impossible. The last couple of days my FaceBook feed kept popping up with these mats from 3wliners. They had 25% off and free shipping. So I took the bait For $127.00 I think they’re a pretty decent mat.
View attachment 20110View attachment 20111View attachment 20112View attachment 20113

I like those a lot. They look like a better fit than the factory ones

 

[Fluxcapacitor11]

Did the bora 2” spacers today. Finally looks like a truck. Took it to the camp last week, got in a little mud, truck did great, but these aev/GM bumpers are garbage. Ok the construction is solid. But all the plastic crap. Yall, I have been on my back with a pressure washer 3 times trying to get the clay and mud out. STILL when I go through the car wash, there is mud dripping from all the plastic pieces/cracks where they attach to the steel bumper sections. truck is just gonna have to be gross for hunting season and then I’ll spend all of February picking all the dirt out of it

 

[AXE]

I had been looking for a set of floor mats that offered removable carpet sections. I priced the genuine GM mats, but shipping was horrendous. Plus finding them in stock somewhere was next to impossible. The last couple of days my FaceBook feed kept popping up with these mats from 3wliners. They had 25% off and free shipping. So I took the bait For $127.00 I think they’re a pretty decent mat.
View attachment 20110View attachment 20111View attachment 20112View attachment 20113

Those are nice! I miss having carpet. The rubber ones are nice, but they always look dirty and dusty 10 minutes after you clean them.

 

[ZR2]

I recently made the following modifications:

1) Steering wheel cover from east detailing.
2) Steering wheel shifters extension in red
3) Headrests stitching from 42stiches
4) Dash ZR2 emblem
5) Shel-loc gas cap

 

[grayhame]

Just picked up a new one yesterday. Tints, subwoofer and ceramic coat will be up first

 

[slicer]

@ZR2 how do you like the steering wheel so far? It looks amazing.

Are the paddle shifters the same ones as the camaros? That's all I can find.

 

[KLA]

Got new tires this week. Went with Atturo Trail Blade MTS 33x12.50r18. The Trail Blade MTS is kind of a hybrid mud tire leaning more toward the mud tire side. But I went with this tire because of the tread that wraps down around the sidewall of the tire. Plus, I love the way the tire looks.

Atturo Tires isn't the most well known tire brand, but I put Toyo Open Country CT's on my Trail Boss and after about 12k miles the front tires cupped so bad that I couldn't stand driving it anymore. At $425/tire and to have that happen I was disgusted with the Toyo's. And I had the whole front end checked twice. Nothing wrong with the front end or front suspension anywhere. Maybe just a bad set of tires, but I wasn't buying them again. So, I went for a less expensive Atturo Trail Blade MTS 33x12.50r18 for $250/tire.

 

[reaper]

View attachment 6099View attachment 6101Painted the Chrome around the Flowtie with black plastidip. Here are some pics of what the flowtie clips on to if anyone is wondering. I removed the chrome trim from the red insert to paint it and then glued it back in place after I was done.

Can you please share the location and or number of clips there are to use the trim removal tool with? I’m having a hard time figuring out how many. Thanks in advance!