What have you done to your Silverado ZR2 this week? 🛠️

[MNNJR69]

Just waiting for the Auxbeam AC 1200 12 gang switch box with remote to come before I wire everything up. Front bumper and winch are next along with some light pods for the hood and the sides of the overland rack

I'll include pictures when everything's up and running

 

[BowTieGuy]

Let's see what you have done with your Silverado ZR2!

I’ve put almost 5k miles on these new shoes, think I’m going to like them this winter. Best thing is no cutting was involved in swapping out factory wheels.

 

[AXE]

I’ve put almost 5k miles on these new shoes, think I’m going to like them this winter. Best thing is no cutting was involved in swapping out factory wheels.

I think you'll like them as far as wear goes. I've got about 13k on mine and they hardly look used. That little lip on the top of the lugs is just now starting to disappear.

 

[Byrds8]

Grill badge changed out. No more chrome on the truck other than the silver buttons in the handles lol.

Throttle controller out for delivery. Awesome since it wasnt due until Monday....now the wait.

 

[Millertime1977]

Put the RAS suspension kit on. Raised back about 1.5”. Went back and forth between this and airbags but decided to try this.

 

[Millertime1977]

Put the RAS suspension kit on. Raised back about 1.5”. Went back and forth between this and airbags but decided to try this.

Before

 

[Millertime1977]

Before

After

 

[Gandalfthegrey]

Ceramic Tint. Chewing on some PPE Tubes and T delete but being a sissy about my warranty.

 

[surfdoc81]

First mod. Picked up a GM Performance exhaust (borla touring) on marketplace for a great price. Truck no longer sounds like a minivan.

 

[ZR2xBIZON]

Made a custom plate for my Decked System.

 

[DNZR2]

The big brown truck showed up this evening. Hope to get it installed tomorrow.

 

[MNNJR69]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

 

[ZR2xBIZON]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

Guac Money!!

 

[MNNJR69]

Guac Money!!

It was my savings for the front bumper and winch....now I have to start the piggy bank all over again

 

[MrScottly]

So I bought a boat load of items for the truck. An entire Bulletpoint mounting system with all the goodies. A hand held radio mount, 2 phone mounts, a Bulletpoint 8 gang switch with mounting plate with an articulating arm, 3 X 20mm ball mounts for the base, 50ft of 12 ga wire to wire up all the extras. A Nilight 5ft RGB flag, 2 X 4.5in side shooter lights for the sides of the rack, the rough country extended angle ditch light kit, the Nilight Aurora underglow kit (the RV kit for extra strips), Nilight RGB bed light kit for the bed of the truck. Also got extra fuse kit, crimp line heat shrink wire connector kit with the tool, 6 piece fuse tap kit, a 50in triple row light bar for the front bumper and extra mount clips. Also Opt7 triple row light bar for the top of the rack in the back to mount under the light bar. Now all I have to do is put everything together


I'll post pictures when I get it all squared away.

Do you know how much hookers and blow ya coulda.....Oh, never mind.

 

[DNZR2]

Range DFM and the high clearance steps instslled.

 

[MNNJR69]

Do you know how much hookers and blow ya coulda.....Oh, never mind.

Married for 26 yrs.... I'm on the payment plan for life

 

[Byrds8]

Married for 26 yrs.... I'm on the payment plan for life

We hit 21 years today.

 

[MNNJR69]

We hit 21 years today.

Happy anniversary

 

[JJHAWKS]

Let's see what you have done with your Silverado ZR2!

Well the tow truck just took my truck to the dealership. And after lifting the hood on Friday they’ve determined it’s not electrical and definitely engine related. Tomorrow morning they will be tearing down my motor to find the issue…… anybody know a good lemon law lawyer?!! It sucks because I absolutely love this truck