Wheel and tire pics

[GATORB8]

I like one of the Black Rhino wheels, but they are a little too busy with the features, so they'd be hard to clean.

Weld has one that I sort of like, but the Method NV305 is still the only one I really like. It's no longer unique in terms of appearance, but they hold up well and are easy to clean.

I used to like RBP, but most of their stuff now looks like the pavement princess made a stop in the design studio. Their website is down with a "check back later, under new ownership" note.

Just mounted the new M106 beadlocks on the Jeep and I’m really impressed with build quality on the Methods. The Racelines were OK, but these are a step above. Even the center caps are nicer, aluminum except the center logo itself and nice hardware.

 

[AXE]

Just mounted the new M106 beadlocks on the Jeep and I’m really impressed with build quality on the Methods. The Racelines were OK, but these are a step above. Even the center caps are nicer, aluminum except the center logo itself and nice hardware.

Looks good! That's kind of the style I like. I would like that even better with 7 solid heavy spokes. I don't like a lot of open space where I see too much brake and rotor. That Weld wheel I mentioned has that vibe.

 

[GATORB8]

Looks good! That's kind of the style I like. I would like that even better with 7 solid heavy spokes. I don't like a lot of open space where I see too much brake and rotor. That Weld wheel I mentioned has that vibe.

It’s 10 solid spokes, but this is the Raceline Clutch these replaced. These are 17s with 37” KO2s.

They’re 8.5s but +18mm similiar to what you are looking for.

 

[AXE]

It’s 10 solid spokes, but this is the Raceline Clutch these replaced. These are 17s with 37” KO2s.

They’re 8.5s but +18mm similiar to what you are looking for.

Yeah, that's what I like more mass and less brakes visible.

 

[BoomSoonZR2]

Looking for some pics of wheels and tires for my Slate Grey 2025 HD ZR2. Looking to go with preferably an 18 with a 37 if someone can confirm it will fit on a stock height setup or possible a 20” wheel. I’d like to stick with a tire that has a decent weight rating so I don’t have any issues pulling my 5th wheel.

I had the Fuel Cyclone, 18” -12 offset on my trail boss. I want them again…but can’t find them anywhere.

 

[VenomSS]

Raising the dead here, but I just put on some Black Rhino Alpha. 0 offset 18x9

 

[BoomSoonZR2]

Raising the dead here, but I just put on some Black Rhino Alpha. 0 offset 18x9

Those look clean! It’s hard to tell from the pic, but are they inline with the fender or poked out a bit?

 

[Je942010]

Ended up going with Fuel Rincons 18x9 with a +1 offset and a 315/70R18 Toyo MT

 

[BoomSoonZR2]

Ended up going with Fuel Rincons 18x9 with a +1 offset and a 315/70R18 Toyo MT

I’ve been looking at the Rincon. I like em! I really wish I could find the same ones I had on my TB, cyclones.

 

[VenomSS]

Those look clean! It’s hard to tell from the pic, but are they inline with the fender or poked out a bit?

They are just about inline with fenders, slightly more poke than factory. Heres before and after

 

[BoomSoonZR2]

They are just about inline with fenders, slightly more poke than factory. Heres before and after

Yeah, that’s about perfect. This was my trail boss….they stuck out quite a bit. 18” Cyclones on 33’s.