What have you done to your Silverado ZR2 this week? 🛠️

[MNNJR69]

I amo n the border this week and its flipping hot but dang this ZR2 awsome driving down Old Mines Road Last time i was here i Have a 2500 and the ride stinks over 10 MPH but this little truck you can haul in.View attachment 5786

Hot 120 here today. When a man says it's supposed to be even hotter this coming week

 

[Slik ZR2]

Not a fan of yellow stitching? Change it.
In about an hour I changed the color of my stitching to red. I used a fabric marker and a rag. Apply a few inches at a time rubbing the marker over the stitches a few times the wipe the residue away with a clear rag. I’ll probably add a second coat in a few days. I learned this one from the guys in the C8 group.

 

[securityguy]

Not a fan of yellow stitching? Change it.
in about an hour I changed the color of my stitching to red. I used a fabric marker and a rag. Apply a few inches at a time rubbing the marker over the stitches a few times the wipe the residue away with a clear rag. I’ll probably add a second coat in a few days. I learned this one from the guys in the C8 group.

Looks good. I actually like the yellow, but this is a great alternative for those that don't. Great job my friend!

 

[zrdeuce]

Not a fan of yellow stitching? Change it.
in about an hour I changed the color of my stitching to red. I used a fabric marker and a rag. Apply a few inches at a time rubbing the marker over the stitches a few times the wipe the residue away with a clear rag. I’ll probably add a second coat in a few days. I learned this one from the guys in the C8 group.

Very nice, good job

 

[KDelta]

Not a fan of yellow stitching? Change it.
in about an hour I changed the color of my stitching to red. I used a fabric marker and a rag. Apply a few inches at a time rubbing the marker over the stitches a few times the wipe the residue away with a clear rag. I’ll probably add a second coat in a few days. I learned this one from the guys in the C8 group.

Was there any leather staining that was left?

 

[MNNJR69]

Not a fan of yellow stitching? Change it.
in about an hour I changed the color of my stitching to red. I used a fabric marker and a rag. Apply a few inches at a time rubbing the marker over the stitches a few times the wipe the residue away with a clear rag. I’ll probably add a second coat in a few days. I learned this one from the guys in the C8 group.

Nice look , makes it match!

 

[MNNJR69]

Hot 120 here today. When a man says it's supposed to be even hotter this coming week

Came out of church service this afternoon to this

 

[Slik ZR2]

Was there any leather staining that was left?

No staining. I did about 12” at a time and made sure to wipe the excess off with a clean rag.

 

[2022 Alabama ZR2]

Came out of church service this afternoon to this

Wow!!

 

[ZR2NYC]

Hot 120 here today. When a man says it's supposed to be even hotter this coming week

damn!!

 

[andrec10]

Came out of church service this afternoon to this

NOPE!

 

[EddieB]

Back in GM after a good stint with Ford. Picked up last week. ‘23 Glacier and only other options are Multi-Flex tailgate and sunroof. So far added:
Chevrolet Accessories:
-Off-road high clearance steps
-Black lug nut kit
-Black center caps
-Kicker tailgate sound
-Tailgate light package
-Bed mat
-REV hard folding cover
-Lund hood deflector-smoke
-NOCO GB150 with case(must have!)
-Putco light bar
-Kicker sub
-Keypad
-Hitch plug

Additional mods:
-Painted red/black badges
-Red Flowtie(temp to see if I liked it)
-Front tint to match rears
-LED license plate lights & backup lights

Future plans:
-589 Shock Skids
-42 Stitches headrests
-Borla exhaust
-Console vault

Where did you get the black center caps? What size fits?

 

[mg1121]

I got it because the 6.2l burns oil and it goes back through into the PVC valve and back into the intake. The J&L oil separator filters out the oil from the hot gas that is going back through the PVC back into the intake to be reburned

Amazon.com

Just ordered thanks for the info

 

[JacoZR2]

Where did you get the black center caps? What size fits?

Got these off Ebay for a '14-'20 Tahoe. Most GM wheels on trucks have had the same size center caps for years: 3 1/4". Seller was summit auto parts and were like $25.00

 

[LCTexas]

MGP Caliper covers are 20% off right now. Code SPRING

They don't list covers for a '23 ZR2

 

[LCTexas]

I'm new here. I got my ZR2 a month ago. I got it in Greenville SC. I drove it back home, 400+ miles to Louisville, KY. Two days later I drove it to Denver, CO. I spent the entire month there working. Each weekend I went into the mountains and drove the gravel forest service roads to fish and hike. I just got home a few days ago. I'm driving back to Clemson SC, tomorrow. By the time I get back next week, I'll have over 7,000 miles on it in less than two months. Let's just say I have and appointment to get my ZR2 wrapped. Hell, I four chips in my windshield. I'm not even going to count the paint chips. I thought they were bird crap splatters.
Have a good one all.

Get you some PPF for the front. 3M makes a good product.

 

[LCTexas]

Get you some PPF for the front. 3M makes a good product. Clear Bra basically. Love mine especially with Black.

 

[Swan]

They don't list covers for a '23 ZR2

Get the ‘22s, fit fine on my ‘23

 

[Swan]

Where did you get the black center caps? What size fits?

Post in thread 'MGP Caliper Covers ZR2 Red w/ Bolts... Black lugs & Center Caps... Bowtie Valve stems.'
https://www.chevyzr2.com/threads/mg...enter-caps-bowtie-valve-stems.1057/post-14024

 

[sardarjee]

Replaced punctured OEM tire (sidewall cut) from difficulty level 1 trail.