What have you done to your Silverado ZR2 this week? 🛠️

[Busa Dave]

Going in tomorrow early to get my ADD bumper and BD lights put on. Going out to NM on Saturday and will give them a good test! Will post pics after I get home with it.

 

[BISONPUNCHER]

The useless hood scoop is no longer just a billboard for Duramax.

 

[AXE]

There's one in the DIC too, but no sense using it with that abomination in clear view.

 

[BISONPUNCHER]

My new Baja Designs A pillar lights.

 

[TimZR2]

New tires after dealer completed recalls and finally fixed warning lights. Went with Mickey Thompson Baja Boss A/T 305/70/18. Wanted 37" to make truck look right, but I drive too much right now to impact gas thirst even more.

 

[AXE]

New tires after dealer completed recalls and finally fixed warning lights. Went with Mickey Thompson Baja Boss A/T 305/70/18. Wanted 37" to make truck look right, but I drive too much right now to impact gas thirst even more.

Bajas look good on the 2500HD!

 

[Busa Dave]

Took about 6 hours to do everything. Very happy with it! Like it much better than the AEV bumper. The lights are insane best I have ever had!

 

[AXE]

Took about 6 hours to do everything. Very happy with it! Like it much better than the AEV bumper. The lights are insane best I have ever had!

Can someone ask him what the purpose of those turned up hooks are all about?


Looks like you could bend rebar or conduit while having a sammich during lunch.

 

[BISONPUNCHER]

Took about 6 hours to do everything. Very happy with it! Like it much better than the AEV bumper. The lights are insane best I have ever had!

Very nice! Now I have truck bumper envy. Also, what AXE asked, what is the upturned hook for? ADD is keeping that a secret.

 

[AXE]

Also, is there any way clean up that corner mess? That exposed part of the subframe and wheel well looks a little low rent. If it doesn't come with anything, I'd be fabbing something up.

The AEV bumper has a couple of pieces of heavy plastic material in the corners to close up that gap. A little different geometry, but sheet metal might be an option to attach to the subframe.

 

[Busa Dave]

Very nice! Now I have truck bumper envy. Also, what AXE asked, what is the upturned hook for? ADD is keeping that a secret.

It is an optical illusion. From the front you do not see that is a very stout hook. Have to go to the website to see it. Am at the ranch in NM right now. The lights are awesome Especially the lights in the fog position because the give me great lighting to the right and left!!! Can see feral hogs better!!

 

[ICE_ZR2]

New molle panel

 

[BISONPUNCHER]

Can someone ask him what the purpose of those turned up hooks are all about?


Looks like you could bend rebar or conduit while having a sammich during lunch.

I E-mailed ADD and asked about the purpose of the turned up hook and Sam S. replied, "that is just a design element of the tow hook."

 

[AXE]

I E-mailed ADD and asked about the purpose of the turned up hook and Sam S. replied, "that is just a design element of the tow hook."

Must not know about rebar and conduit!

 

[MNNJR69]

Forgot to post but I installed my decked system. I love it. Going to fab up a wheel holder for the spare.
View attachment 17121

See bro ...now you know! They are freaking awesome. Get the anti slip mat that decked sells (about $250? If I remember correctly.) It tends to slide around a little bit so what I did is took 2 1/2-3/4 self tapping screws and installed them on each of the top corners near the cab. That way when I go through car washes the dryer doesn't blow it all over the place and it stays in place nicely when I put loads in it. Leave the rear section unfastened, that way air can get underneath to dry whatever water there is between the mat and the top of the deck. Happy for you bro! Enjoy it! Did you get the first gen or the second gen?

 

[MNNJR69]

From what I know, you cannot do that. In order to connect to AA, you MUST turn OFF CarPlay on your phone and visa versa or they will both try to connect at the same time and that creates issues.

My wife and I both have are Samsung Galaxy phones connected to the truck but it gives an option to choose which one is the primary. The only time hers connects before mine is if she gets in the truck with her phone before me. Other than that, there is no issue. Mine automatically connects first.

 

[RCF71]

My eq settings are similar. I think I have my bass more up and fade is centered. My dip switches are all up though as it provides more gain.

Based on everything I read, if installed per the directions and using the gain knob, all switches up is probably best. But if you use the woofer inputs (wires run from passenger door under seat to the center console), all up is WAY too much gain. I tried that first, so first hand knowledge there!

 

[ZR2xBIZON]

See bro ...now you know! They are freaking awesome. Get the anti slip mat that decked sells (about $250? If I remember correctly.) It tends to slide around a little bit so what I did is took 2 1/2-3/4 self tapping screws and installed them on each of the top corners near the cab. That way when I go through car washes the dryer doesn't blow it all over the place and it stays in place nicely when I put loads in it. Leave the rear section unfastened, that way air can get underneath to dry whatever water there is between the mat and the top of the deck. Happy for you bro! Enjoy it! Did you get the first gen or the second gen?

Got it! I think I will get the mat and some locks for the top cubbies.
I got the second gen. Chevy accessories had it for $400 off so I said what the heck, I don't need to eat for 6 mths anyway.

 

[MNNJR69]

Nice! Your gonna love it! Happy for you bro!

 

[ZR2xBIZON]

Nice! Your gonna love it! Happy for you bro!

Thanks my brotha, I appreciate you!