Stock 23 wheel offset?

[ox1574]

Can anyone tell me what the stock offset is on the 2023 ZR2 18" rims? I've seen numbers all the way from +12 to +28. Trying to determine if I want to go with 0 offset or -12.
TIA

 

[AXE]

+32mm, at least on the Bison. I'm running -12 Methods and and have a detailed post on the trimming required to get clearance for 295 tires.

 

[Koppster]

For what it's worth, I went with -12 and love the look.

 

[OC ZR2]

Mine is 26 stock, have a set of Black Rhinos going on next week, 17’s - 8.5 with 0 offset.

 

[ox1574]

This is the standard ZR2 and not the Bison. I think the consensus I've found is stock offset is +26. I want to stay with 18" rims and probably going up to a 285/70 since it looks like 285/75's won't fit without modifications which I don't want to do. With the added tire width and going with a 0mm offset I think that will work for me. Not sure if going to -12mm with that setup will rub or not.

 

[OC ZR2]

I have standard ZR2, and someone on the oversize tire thread has the 0 offset which looked great, no rubbing. -12 with the width may rub

 

[KLA]

Mine is 26 stock, have a set of Black Rhinos going on next week, 17’s - 8.5 with 0 offset.

I had 0 offset wheels on my old truck, and that Black Rhino wheel in the picture does not look like a 0 offset wheel. It looks no different than the offset of a stock wheel. Sometimes it's hard to tell from a picture.

 

[OC ZR2]

Came direct from rhino and my son in law ordered them. Says 0 offset on the sticker for each. Should be fine

 

[AXE]

I had 0 offset wheels on my old truck, and that Black Rhino wheel in the picture does not look like a 0 offset wheel. It looks no different than the offset of a stock wheel. Sometimes it's hard to tell from a picture.

Probably a lot of material on the back side of the hub to get the spokes toward the edge of the wheel.