Dash Cam and Radar Detector Installation

I have a 2023 Silverado I am looking to install a Blackvue B-130X battery in. I have been having trouble locating a good fuse to tap into for the battery. Could you give me some advice?
Fuse 26 in the passenger side fuse box is switched power for the USB. If you don’t need constant power (hot 24/7) that’s an easy place to tap into with a fuse tap.

Precision Upfit Micro3 ATM ADD-A-Circuit Fuse Tap Link FUSETAP with 5amp Fuse! https://a.co/d/jeRMei3
 
As an Amazon Associate we earn from qualifying purchases.
Just installed my gen5diy adapter today. It’s a very high quality plug and was super easy to install. I’m very happy with it so far!
Hello.
Can you answer a dumb question of how do you undo the wiring harness with the red clip?
Have the adapter but yet to figure out how to get the dang plug apart!
Thanks in advance.
 
Hello.
Can you answer a dumb question of how do you undo the wiring harness with the red clip?
Have the adapter but yet to figure out how to get the dang plug apart!
Thanks in advance.
From what I remember I used a small flathead and carefully popped the clip on the plug.
 
Greetings - after being a RAM owner since 2005, I came back to the dark side and am happy to be driving a 2024 ZR2. I am also needing assistance with both a switched and constant fuse location for my dash cam install. It appears that all locations in both interior panels are showing hot with the key off - what am I missing?
 
Greetings - after being a RAM owner since 2005, I came back to the dark side and am happy to be driving a 2024 ZR2. I am also needing assistance with both a switched and constant fuse location for my dash cam install. It appears that all locations in both interior panels are showing hot with the key off - what am I missing?
There was a discussion on this and pics of the fuse box to grab accessory and battery power on the passenger side. Try a search on the forum and see if you can pull it up.
 

Most Member Reactions

Back
Top